Email updates

Keep up to date with the latest news and content from Parasites & Vectors and BioMed Central.

Open Access Highly Accessed Research

Spatio-temporal occurrence of Culicoides biting midges in the climatic regions of Switzerland, along with large scale species identification by MALDI-TOF mass spectrometry

Christian Kaufmann*, Irene C Steinmann, Daniel Hegglin, Francis Schaffner and Alexander Mathis

Author Affiliations

Vector Entomology Unit, Institute of Parasitology, Vetsuisse Faculty, University of Zürich, Winterthurerstrasse 266a, Zürich, 8057, Switzerland

For all author emails, please log on.

Parasites & Vectors 2012, 5:246  doi:10.1186/1756-3305-5-246


The electronic version of this article is the complete one and can be found online at: http://www.parasitesandvectors.com/content/5/1/246


Received:5 September 2012
Accepted:16 October 2012
Published:31 October 2012

© 2012 Kaufmann et al.; licensee BioMed Central Ltd.

This is an Open Access article distributed under the terms of the Creative Commons Attribution License ( http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Background

Culicoides biting midges are incriminated as biological vectors of a number of viruses, e.g. bluetongue virus. In order to define vector-free periods/areas and to assess the vectorial role of the various Culicoides species, a comprehensive knowledge on their spatio-temporal occurrence is required.

Methods

Biting midges were monitored on farm sites with livestock in the defined climatic regions, including high altitudes, of Switzerland by overnight trapping at 12 locations once a week over three years using UV-light traps. Based on morphological features, they were separated into three groups (i.e. Obsoletus, Pulicaris, other Culicoides spp.), and identification to the species level was achieved by protein profiling using MALDI-TOF mass spectrometry.

Results

Around 550,000 biting midges in total were collected, revealing a dominance (82 to 99%) of the Obsoletus group species up to an altitude of 1,200 m and of the Pulicaris group species above 1,500 m (85% at the highest trapping site at 2,130 m). The maximum number of midges collected in a summer night (756 to 19,682) as well as the total number of midges caught over three years (from 6,933 to 149,439) varied highly among the sites, whereas the annual variation in total midge abundance at the locations was statistically insignificant. MALDI-TOF MS of 100 randomly selected individual biting midges per trapping site yielded high quality spectra for 1,187 of the 1,200 (98.9%) specimens of which 1,173 could be assigned to one of the 15 Culicoides species for which biomarker mass sets are available in the reference database.

Conclusions

There are no biting midge-free zones in all of the agriculturally utilized areas (including alpine summer pastures) of Switzerland. Annual variations of midge numbers at the sampled locations were low, indicating that monitoring of midges should preferably be done by investigating a large number of sites for one season instead of few locations for extended periods of time. High throughput species identification of midges by MALDI-TOF MS is feasible, and this technique adds to other recently developed methods for the identification of midges (PCRs in various formats, interactive identification keys), facilitating epidemiological and biological in-depth studies of these important insects.

Keywords:
Culicoides; Biting midge; Vectors; Obsoletus group; Pulicaris group; Species identification; MALDI-TOF MS; Monitoring; Abundance; Climatic region

Background

The unexpected and explosive outbreak of the bluetongue disease in Northern and Central Europe in 2006 triggered Europe-wide activities to monitor the biological vectors of the disease, biting midges of the genus Culicoides (Diptera, Ceratopogonidae), with the primary aim to define vector-free periods [1-5]. Thus, overviews of seasonally vector-free periods, determined for different years, are available for a number of countries [6].

Culicoides midges are incriminated as putative vectors of other orbiviruses of relevance for Europe at present (African horse sickness virus, epizootic haemorrhagic disease virus, Toggenburg virus; [7-11]). Very recently, an Orthobunya virus has emerged in Europe (‘Schmallenberg virus’), causing fever, diarrhoea, malformed new-borns and abortion [12], and this virus is assumed to be transmitted by biting midges and/or mosquitoes in analogy to the known vectors of related viruses [13]. Interestingly, biting midges of another Ceratopogonidae genus (Forcipomyia, subgenus Lasiohelea), have recently been incriminated as vectors of protozoan parasites of the genus Leishmania in Australia [14]. In addition to their emerging role as vectors, biting midges are a well-known nuisance pest in many parts of the world, and they can cause insect bite hypersensitivity (‘sweet itch’), particularly in equids, but the species that cause the clinical symptoms under field conditions are not known [15].

The identification of the tiny (1–3 mm) biting midges is primarily carried out using morphological features, and a recently developed interactive identification key will be of great practical value [16]. The wing patterns allow for a rapid classification of the insects into groups (Obsoletus group, Pulicaris group, other Culicoides[17]http://www.culicoides.net webcite). Certain species can be identified with their wing pattern only, while others require time consuming microscopic analysis of slide-mounted insect preparations [18,19]. Therefore, morphological identification can be a time-consuming procedure and is known to be a very difficult task in many cases even for expert taxonomists [20], due to faint characteristics or intraspecific variability [21]. Furthermore, the existence of cryptic species, i.e. morphologically indistinguishable midges that are genetically distinct, has recently been described [21,22]. Hence, in large entomological surveys, trapped midges are for practical reasons first grossly separated to group level (Obsoletus, Pulicaris, other Culicoides) and further identified to species level depending on the available resources. Generally, species of the Obsoletus group dominated in European monitoring projects e.g. [2-5,23,24]. In a recent study in Austria, for example, a nation-wide monitoring at 54 locations at altitudes from 116 to 1,190 meters above sea level (m.a.s.l.) and run over 15 months revealed 90.2% of the biting midges as belonging to the Obsoletus group, 5.3% to the Pulicaris group, and 4.5% to other Culicoides[3].

Alternative approaches to midge identification include PCR. Several such assays in various formats have been developed for the specific detection of a number of Culicoides species [summarized in 22], including a microarray format for the identification of Obsoletus group species [25]. Recently, mass spectrometry (matrix-assisted laser desorption/ionization time of flight mass spectrometry, MALDI-TOF MS) has been evaluated as a diagnostic tool [26], and a reference database of biomarker masses covering 15 Culicoides species, including an abundant cryptic species, was established [27].

The aims of the present study were to determine over three years the spatio-temporal dynamics of biting midges in the defined climatic regions, including high altitudes, of Switzerland, and to apply MALDI-TOF MS for the species identification of a large number of field-collected specimens.

Methods

Trapping locations

The 12 trap locations were chosen in the vicinity of Swiss national basic climatological network reference stations (though no meteorological data were evaluated in the work presented) in 11 of the 12 defined climatic regions of the country [28] (Table 1). From the three climatic regions along the northern slope of the Alps (east, central, west), only two were considered (east, central). Instead, an additional second trap at high altitude (municipality ‘Juf’, 2,130 m) was run in the alpine region ‘North and Central Grisons’. The sites were distributed all over the country, covering low (270 m) and high (2,130 m) altitudes, areas with Atlantic climate and climate influenced by the Mediterranean Sea, and areas within and on both sites of the two mountain ranges (Alps, Jura).

Table 1. Features of the trapping locations and general entomological results of the 3 year monitoring

Insect collection

Biting midges were caught on farms using the Onderstepoort blacklight suction traps [29] operated once per week, from approximately 2 h before dusk and until after dawn [17]. Criteria applied for the placement of the traps [17] were 1) presence of more than 10 head of ruminant livestock, i.e. cattle, sheep, goats or horses usually within 25 m, 2) forest and naturally created water pools, streams or swamps in neighbourhood, 3) electricity available, and 4) agreement of the farmer to operate the traps. The traps were placed outdoors at weatherproof sites, ideally on the stable wall at a height between 1.5 and 2.0 m above the ground, and with no strong light sources in the immediate vicinity. The insects were collected into 200 ml bottles containing 70% ethanol and which were sent to our institute every fortnight. The monitoring was carried out from June 2008 to May 2011 (total 156 weeks).

Insect identification

Morphology

In a first step, Culicoides specimens were separated from the other insects using their characteristic features of wings, antennae, and legs. In a second step, females only were separated based on wing morphology into the Obsoletus group (C. chiopterus, C. obsoletus, C. scoticus and C. dewulfi, the latter phylogenetically not belonging to this group [30]), the Pulicaris group (C. deltus, C. grisescens, C. impunctatus, C. lupicaris, C. newsteadi, C. pulicaris, C. punctatus) and other Culicoides species. From catches that were estimated to contain more than 500 Culicoides, subsamples were analysed as described [31].

MALDI-TOF MS

MALDI-TOF MS-based identification of biting midges was carried out as described [27]. Briefly, the abdomens of the Culicoides specimens were removed, the remaining parts air-dried for approx. 2–4 min and individually transferred to 1.5 ml Eppendorf tubes where they were triturated in 10 μl of 25% formic acid using a manual homogenizer (Bio Vortexer, Fisher Scientific, Wohlen, Switzerland) with disposable pellet pestles. One μl of the homogenate was spotted in duplicate onto a steel target plate, air dried at room temperature for approx. 15 min, and 1 μl of SA matrix (saturated solution of sinapic acid in 60% acetonitrile, 40% H2O, 0.3% trifluoroacetic acid; all chemicals from Sigma-Aldrich, Buchs, Switzerland) was added directly onto the spots. After air-drying for 15 min, the plates were sent by overnight courier to a commercial company (Mabritec SA, Riehen, Switzerland) where the mass fingerprints were generated as described [27] and subjected to automated identification against >4,000 validated biomarker mass sets, including 15 Culicoides species-specific ones (Obsoletus group: C. chiopterus, C. dewulfi, C. obsoletus, C. scoticus; Pulicaris group: C. deltus, C. grisescens I, C. grisescens II {cryptic species [22]}, C. lupicaris, C. pulicaris, C. punctatus; and other Culicoides: C. circumscriptus, C. festivipennis, C. imicola, C. nubeculosus, C. pallidicornis) or, in case of no or low (<90%) identification value, to full spectra comparison against all available spectra (currently approx. 60,000 including all insect reference whole spectra).

PCR/sequencing

DNA was isolated from the retained abdomens with a kit (QIAamp DNA Mini Kit, Qiagen, Hilden, Germany) and the species determined by PCR/sequencing as described [22], sequencing by Synergene GmbH (Schlieren, Switzerland).

Statistics

Kruskal-Wallis tests (PASW Statistics 18 of SPSS) were used to detect temporal differences in the trapping success for all Culicoides and for the different Culicoides groups. Levels of significance (p<0.05) are given without and with Bonferroni correction to correct for multiple testing [32].

Results

Culicoides biting midges were monitored at 12 locations in Switzerland over three years by overnight catching once a week. A total of nearly 550,000 biting midges were collected, together with around 1.3 million other insects as by-catch that entered the Onderstepoort blacklight traps (Table 1). The biting midges were separated by morphology into Obsoletus group, Pulicaris group and other Culicoides, with the first group dominating the Swiss midge fauna up to an altitude of 1,200 m, i.e. accounting for more than 80% of the midges. Farther up, the species of the Pulicaris group prevailed (85% of the biting midges at the highest trapping site at 2,130 m). Notable abundances of other Culicoides species were only observed at the single trapping site south of the Alps as well as at the three sites of high (>1,500 m) altitudes (Table 1).

The maximum number of midges collected in a single summer night largely varied among the sites, ranging from 756 (Commugny, altitude 420 m, trapping date 4 June 2008) to 19,682 (Dittigen, 360 m, 11 June 2008). Interestingly, the two highest altitude sites ranked second (n=18,129, Sils, 1,800 m, 02 August 2010) and fourth (n=9,633, Juf, 2,130 m, 12 August 2009) (not shown). Also, the overall number of midges collected over the tree years strongly varied at the different locations (from 6,933 to 149,439; Table 1).

For further analyses, only the six trapping locations with high sampling reliability (i.e. at least 145 of the maximal 156 weekly catches available) were considered (see farms highlighted in grey in Table 1). The seasonal dynamics of the biting midges at these six sites over the three investigated years (June to May) is shown in Figure 1, displaying the monthly averages of the catches. Significant activity (more than 10 midges per trap and night) was observed between April and November, and on average less than one midge was collected during the winter months (December to March) with the exception of the location ‘Juf’ where a low abundance of around 10 midges were observed during the second and third trapping year (Figure 1F).

thumbnailFigure 1. Seasonal dynamics of biting midges at six trapping sites. Data from the locations with high overall sampling reliability, i.e. at least 145 of the maximal 156 weekly catches available; see Table 1: A) Commugny (altitude 420 m); B) Wädenswil (620 m); C) Mühlethurnen (670 m); D) Chateau d’Oex (940 m); E) Chaumont (1,110 m); F) Juf (2,130 m). The monthly averages of total number of collected Culicoides biting midges are shown by black (season 2008/2009), open (2009/2010) and grey (2010/2011) circles. Note the logarithmic scale.

The variability of midge abundance (total Culicoides as well as the three different Culicoides groups separately) at the sites between the 3 years was analysed with the catches from June to September, which account for more than 80% of the annual midge collection in the vast majority of cases (Table 2). Statistically significant annual variation in midge abundance was neither found for the total number of midges nor for the majority of analyses of the midges belonging to the three groups (Table 2). Statistically significant variability between the years was determined in three instances (sites ‘Wädenswil’ and ‘Mühlethurnen’ for the Pulicaris group midges, site ‘Château d’Oex’ for the other Culicoides group, Table 2), all relating to midge groups with low abundances at these locations. Furthermore, only the variation of the numerically marginal Pulicaris group from ‘Mühlethurnen’ over the 3 years remained significant after Bonferroni correction for multiple testing (Table 2).

Table 2. Statistical comparison1of the number of Culicoides collected at six locations2

One hundred randomly selected individual biting midges per trapping site, all collected in late summer 2010 (period of highest abundance) and stored in 70% ethanol for more than 1 year, were subjected to MALDI-TOF MS analyses (Table 3). Thus, high quality spectra were obtained for 1,187 of the 1,200 (98.9%) analysed specimens of which 1,173 could be assigned to one of the 15 Culicoides species for which biomarker mass sets were available in the reference database. PCR/sequencing was done with six randomly chosen ( http://www.random.org webcite) specimens per site, confirming in all cases the MALDI-TOF MS result (C. obsoletus, N=38; C. grisescens II, N=13; C. scoticus, N=11; C. grisescens I, N=5, C. dewulfi, N=2; 1 each C. circumscriptus, C. deltus, C. lupicaris, Table 3). Fourteen specimens yielded no MALDI-TOF MS identification, i.e. no corresponding reference spectra have as yet been deposited in the database. These 14 insects were identified by PCR/sequencing as C. fascipennis (n = 5), C. reconditus (3), C. kibunensis (2), C. segnis-like (2) and 1 each of C. newsteadi and C. segnis. Finally, thirteen insects (1.1%) could not be identified by MALDI-TOF MS due to low quality spectra (low signal/noise ratio, few masses due to signal suppression).

Table 3. MALDI-TOF MS based species identification of 100 randomly selected Culicoides specimens from the 12 trapping sites1

The MALDI-TOF-MS-based identification corresponded well with the rough morphological classification into the three groups Obsoletus, Pulicaris, other Culicoides. For example, the corresponding percentage of insects belonging to these groups as identified morphologically or by mass spectrometry were 91.4/89, 1.9/3 and 6.7/8, respectively, for the sample from the location ‘Novazzano’ (Table 3). This confirms the reliability of morphological identification to the group level when done by experienced personnel.

Discussion

The spatio-temporal occurrence of Culicoides biting midges was determined in Switzerland over 3 years at 12 locations with one trap per site, at altitudes from 270 to 2,130 m. The six trapping locations (up to 670 m; Table 1) were part of a national monitoring system that included an additional 12 trapping sites in Switzerland and one in Liechtenstein up to a maximal altitude of 870 m. These 13 traps were only run from October until May to determine the vector-free period (i.e. less than five parous midges per trap night [33]) which is of high relevance when restriction measures for the movement of livestock are applied during an outbreak. Thus, for these two countries, the vector-free period lasts from week 47–49 to week 12–14, depending on weather conditions (for vector-free periods in other European countries see [6]). In order to also identify putatively 0vector-free areas, which are conceivable as retreat areas for animals during outbreaks of midge-borne diseases, six traps were placed at locations not covered by the national monitoring, particularly at higher altitudes. Monitoring activities in other European countries focussed on locations below 1,400 m (highest altitudes investigated: 1.400 m in Sicily [34]; 1,190 m in Austria [3]; 1,184 m in Central Italy [35]). The highest record of Culicoides in Switzerland was 1,600 m (from a zoological study [36]). We determined high abundances at the high altitude locations (1,800, 2,130 m; Table 1). In accordance with earlier preliminary studies [37,38], midges of the Pulicaris group consistently prevailed at high altitudes, as is the case at high latitudes in Scandinavia [5,39]. Nevertheless, biting midges of the Pulicaris group occasionally (single farms, few catches) occurred in higher numbers than the largely dominating Obsoletus group species in Central Europe [40,41]. However, in only one of our total 1,202 catches from the nine locations below 1,110 m altitude (Table 1) were the Pulicaris group species the most abundant (not shown). Species identification of 100 randomly selected midges per locations (by MALDI-TOF MS, see below) revealed a vast predominance of C. obsoletus (total 67.6%) and C. scoticus (24.8%) at the nine low altitude locations and of the cryptic species C. grisescens II (67.3%) at the three sites above 1,500 m. Highly interestingly, single specimens of C. obsoletus and C. scoticus were identified in the Alpine region and, vice versa, of C. grisescens II in the lowlands (Table 3), putatively due to the (albeit rare) long range dispersal of these tiny insects [42] and references cited therein. Further, whereas C. obsoletus was dominating in eight of the nine lower altitude locations, C. scoticus accounted for 95 of the 100 midges at the ninth location (‘Dittingen’, Table 3). As these analyses were done with insects from a single catch per location, obtained in summer, further analyses are required to understand the spatio-temporal population dynamics of the various species.

We observed a considerable range of the total number of collected biting midges between the locations. Such a variability between sites/farms is well known from many other studies e.g. [20,38,43-45]. In a previous study in Switzerland, for example, the total number of biting midges collected over one season at two farms only 4 km apart and located at the same altitude differed by the factor 24 [38]. Major factors influencing the abundance of midges are particularly topoclimate, land use and soil (as proxy for larval breeding sites) [35,46-48]. However, when comparing the number of midges we collected at the locations over three consecutive summers (June – September), statistically significant differences were neither observed for the total number nor for the vast majority of analyses of the three Culicoides groups (Table 2). Thus, collection of midges over the four summer months during one single year sufficed to obtain a representative picture of their abundances at a given location.

Our study was running over 3 years, adding up to a maximum total number of 156 weekly trappings per location. At six of the 12 locations, more than 145 catches were made (Table 1), and the data from these locations were used to depict the seasonal dynamics (Figure 1) and to analyse yearly differences in abundance (Table 2). The lower number of trappings at the other locations was due to technical problems (unnoticed failure of light bulbs/ventilator); missing/incorrect labelling of catches; independent decisions taken by farmers to skip trapping during adverse (mainly cold) weather conditions, and by simply forgetting to operate the traps by the farmers. A somewhat surprising and unique picture was obtained from the highest altitude trapping location (2,130 m) where, throughout two winters low midge activity was observed (Figure 1). We speculate that midges from the inside population escaped through shakes in the wooden wall of this barn. Such indoor populations of biting midges can reach considerable sizes [49-52] albeit these populations are also strongly reduced in winter [50] and own unpublished results from another trapping location.

MALDI-TOF MS has come of age for high throughput, accurate and reproducible identification of medically relevant microorganisms (bacteria, yeasts, filamentous fungi) at low costs and minimal preparation time [53]. Only recently, this proteomic approach has become available for Culicoides identification, relying on a validated reference database of biomarker mass sets from 15 Culicoides species [27], all but one (C. imicola) being indigenous to Switzerland. Analyses of 1,200 biting midges with MALDI-TOF MS confirmed the method’s reliability, as 98.9% of the specimens yielded high quality spectra, and 97.8% of the midges could be assigned to one of the species (Table 3) included in the database [27]. Obviously, the database covers the most abundant species of Central Europe. It is not clear how many indigenous Culicoides species exist in Switzerland. A compilation based on published data lists 35 established valid species [54]. In comparison, 51 species have been listed for north-eastern France, a region which has thoroughly been studied [18] (Delécolle, personal communication). However, several new species as well as specimens that could not unequivocally be identified by morphology have recently been reported from Switzerland [22,23,37,45]. In addition, cryptic species have been reported [21,22], and the genetic identification of two midges from the highest altitude trapping site as C. segnis-like (with 96% sequence identity to a C. segnis GenBank entry) indicates that the taxonomy of Culicoides midges remains an unfinished story.

No biomarker mass sets existed for 14 specimens, which therefore could not be assigned to a species. These 14 insects belonged to six species as identified by PCR/sequencing (Table 3), including five C. fascipennis. As the biomarker mass set for a species in general is derived from the reference spectra of at least five genetically confirmed specimens [27], a C. fascipennis-specific biomarker mass set comprising 29 masses (not shown) could be derived and added to the database.

Poor quality mass spectra, yielding no information with regard to species or group affiliation, were obtained for 13 (1.1%) specimens. The main source for this failure is most probably insufficient homogenization, which was done by a hand-held homogenizer, and automated sample preparation is desirable. With the already very high rate of good quality spectra (98.9%) obtained using a ‘quick and dirty’ preparation, it seems doubtful whether the evaluation of laborious refinements of pre-analytical processes might be a worthwhile expedient approach to further increase the efficiency of MALDI-TOF MS analyses.

Thus, MALDI-TOF MS is a new tool available for high throughput Culicoides species identification. This method is particularly economic for approaches requiring detailed and quantitative information on the midge fauna (to gain a rapid overview on the species present; to follow their spatio-temporal occurrence; to identify morphologically similar or indistinguishable species, e.g. C. obsoletus and C. scoticus) whereas PCR performed on DNA from pools of midges remains the method of choice for tracking down one or a few species of interest.

The foundation for MALDI-TOF MS analyses is the availability of a database with reference biomarker masses from carefully confirmed reference specimens. As the creation and maintenance of such a database is a tedious task, a centralised structure seems to offer an efficient solution. The database we rely on was created in collaboration between our group and a private company (Mabritec SA, Riehen, Switzerland) and, as shown in this work, enlarges when being utilized. Thus, this database might be of value as the core of an eventual comprehensive Culicoides database.

Conclusion

There are no biting midge-free zones in the agriculturally utilized areas (including alpine summer pastures) of Switzerland, with midges of the Obsoletus group, which are considered the main vectors of bluetongue virus, dominating up to altitudes as high as 1,200 m. Above 1,500 m, the Pulicaris group whose species’ vector competences are largely unknown prevails with high populations. Our three-year monitoring revealed highly different numbers of Culicoides spp. collected at the 12 sites, but annual variations at the various locations were statistically insignificant, indicating that monitoring of midges preferably is done by investigating large numbers of sites for one season instead of few locations during extended periods of time. High throughput species identification of midges by MALDI-TOF MS is feasible. This technique adds to other recently developed methods for the identification of midges (PCRs in various formats, interactive identification keys), facilitating epidemiological and biological in-depth studies of these important insects.

Competing interests

The authors declare that they have no competing interests.

Authors’ contributions

AM and FS conceived the study; FS supervised the morphological and AM the genetical identification; CK and IS supervised and carried out the field and laboratory work; CK and DH analysed the data and interpreted the results; AM wrote the first draft of the paper, and all authors contributed to the final manuscript which they approve.

Acknowledgements

We would like to express our gratefulness to all the farmers who run the traps and to Jeannine Hauri for excellent technical assistance. We highly acknowledge the financial support by the Swiss Federal Veterinary Office (grant 1.08.10).

References

  1. Meiswinkel R, Baldet T, de Deken R, Takken W, Delécolle J-C, Mellor PS: The 2006 outbreak of bluetongue in northern Europe - the entomological perspective.

    Prev Vet Med 2008, 87:55-63. PubMed Abstract | Publisher Full Text OpenURL

  2. Hoffmann B, Bauer B, Bauer C, Bätza H-J, Beer M, Clausen P-H, Geier M, Gethmann JM, Kiel E, Liebisch G, Liebisch A, Mehlhorn H, Schaub GA, Werner D, Conraths FJ: Monitoring of putative vectors of bluetongue virus serotype 8, Germany.

    Emerg Infect Dis 2009, 15:1481-1484. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  3. Silbermayr K, Hackländer K, Doscher C, Koefer J, Fuchs K: A spatial assessment of Culicoides spp. distribution and bluetongue disease risk areas in Austria.

    Berl Munch Tierarztl 2011, 124:10-17. OpenURL

  4. Berisha B, Goga I, Hulaj B, Caushi D, Sherifi K, Wilsmore AJ, Taylor WP: Entomological research on the vectors of bluetongue disease and the monitoring of activity of Culicoides in the Prishtine region of Kosova.

    Vet Ital 2010, 46:431-437. PubMed Abstract | Publisher Full Text OpenURL

  5. Ander M, Meiswinkel R, Chirico J: Seasonal dynamics of biting midges (Diptera: Ceratopogonidae: Culicoides), the potential vectors of bluetongue virus, in Sweden.

    Vet Parasitol 2012, 184:59-67. PubMed Abstract | Publisher Full Text OpenURL

  6. Anonymous: Bluetongue. European Commission Health and Consumers;

    [ http://ec.europa.eu/food/animal/diseases/controlmeasures/bluetongue_en.htm webcite]

    OpenURL

  7. Zimmerli U, Herholz C, Schwermer H, Hofmann M, Griot C: Afrikanische Pferdepest und equine Encephalosis: Muss sich die Schweiz vorbereiten?

    Schweiz Arch Tierh 2010, 152:165-175. PubMed Abstract | Publisher Full Text OpenURL

  8. Mellor PS, Hamblin C: African horse sickness.

    Vet Res 2004, 35:445-466. PubMed Abstract | Publisher Full Text OpenURL

  9. Chaignat V, Worwa G, Scherrer N, Hilbe M, Ehrensperger F, Batten C, Cortyen M, Hofmann M, Thuer B: Toggenburg Orbivirus, a new bluetongue virus: initial detection, first observations in field and experimental infection of goats and sheep.

    Vet Microbiol 2009, 138:11-19. PubMed Abstract | Publisher Full Text OpenURL

  10. Anonymous: Scientific opinion on epizootic hemorrhagic disease.

    EFSA J 2009, 7:1418. OpenURL

  11. Yadin H, Brenner J, Bumbrov V, Oved Z, Stram Y, Klement E, Perl S, Anthony S, Maan S, Batten C, Mertens PP: Epizootic haemorrhagic disease virus type 7 infection in cattle in Israel.

    Vet Rec 2008, 162:53-56. PubMed Abstract | Publisher Full Text OpenURL

  12. Hoffmann B, Scheuch M, Höper D, Jungblut R, Holsteg M, Schirrmeier H, Eschbaumer M, Goller KV, Wernike K, Fischer M, Breithaupt A, Mettenleiter TC: Novel orthobunyavirus in cattle, Europe, 2011.

    Emerg Infect Dis 2011, 18:469-472. OpenURL

  13. Lehmann K, Werner D, Hoffmann B, Kampen H: PCR identification of culicoid biting midges (Diptera, Ceratopogonidae) of the Obsoletus complex including putative vectors of bluetongue and Schmallenberg viruses.

    Parasit Vectors 2012, 5:213. PubMed Abstract | BioMed Central Full Text OpenURL

  14. Dougall AM, Alexander B, Holt DC, Harris T, Sultan AH, Bates PA, Rose K, Walton SF: Evidence incriminating midges (Diptera: Ceratopogonidae) as potential vectors of Leishmania in Australia.

    Int J Parasitol 2011, 41:571-579. PubMed Abstract | Publisher Full Text OpenURL

  15. Van Oldruitenborgh-Oosterbaan MM S, Van Poppel M, De Raat IJ, Van den Boom R, Savelkoul HF: Intradermal testing of horses with and without insect bite hypersensitivity in The Netherlands using an extract of native Culicoides species.

    Vet Dermatol 2009, 20:607-614. PubMed Abstract | Publisher Full Text OpenURL

  16. Mathieu B, Cêtre-Sossah C, Garros C, Chavernac D, Balenghien T, Carpenter S, Setier-Rio M-L, Vignes-Lebbe R, Ung U, Candolfi E, Delécolle JC: Development and validation of IIKC: an interactive identification key for Culicoides (Diptera: Ceratopogonidae) females from the Western Palaearctic region.

    Parasit Vectors 2012, 5:137. PubMed Abstract | BioMed Central Full Text | PubMed Central Full Text OpenURL

  17. Goffredo M, Meiswinkel R: Entomological surveillance of bluetongue in Italy: methods of capture, catch analysis and identification of Culicoides biting midges.

    Vet Ital 2004, 40:260-265. PubMed Abstract | Publisher Full Text OpenURL

  18. Delécolle J-C: Nouvelle contribution à l’étude systématique et iconographique des espèces du genre Culicoides (Diptera: Ceratopogonidae) du nord-est de la France. PhD thesis. Strasbourg: Université Louis Pasteur; 1985. PubMed Abstract | Publisher Full Text OpenURL

  19. Campbell JA, Pelham-Clinton EC: A taxonomic review of the British species of Culicoides Latreille (Diptera, Ceratopogonidae).

    Proc Roy Soc Edinb B 1960, 67:181-302. OpenURL

  20. Meiswinkel R, Goffredo M, Leijs P, Conte A: The Culicoides 'snapshot': a novel approach used to assess vector densities widely and rapidly during the 2006 outbreak of bluetongue (BT) in The Netherlands.

    Prev Vet Med 2008, 87:98-118. PubMed Abstract | Publisher Full Text OpenURL

  21. Pages N, Munoz-Munoz F, Talavera S, Sarto V, Lorca C, Nunez JI: Identification of cryptic species of Culicoides (Diptera: Ceratopogonidae) in the subgenus Culicoides and development of species-specific PCR assays based on barcode regions.

    Vet Parasitol 2009, 165:298-310. PubMed Abstract | Publisher Full Text OpenURL

  22. Wenk C, Kaufmann C, Schaffner F, Mathis A: Molecular characterisation of Swiss Ceratopogonidae (Diptera) and evaluation of real-time PCR assays for the identification of Culicoides biting midges.

    Vet Parasitol 2012, 184:258-266. PubMed Abstract | Publisher Full Text OpenURL

  23. Casati S, Racloz V, Delécolle JC, Kuhn M, Mathis A, Griot C, Stark KDC, Vanzetti T: An investigation on the Culicoides species composition at seven sites in southern Switzerland.

    Med Vet Entomol 2009, 23:93-98. PubMed Abstract | Publisher Full Text OpenURL

  24. Venail R, Balenghien T, Guis H, Tran A, Setier-Rio M-L, Delécolle JC, Mathieu B, Cêtre-Sossah C, Martinez D, Languille J, Baldet T, Garros C: Assessing diversity and abundance of vector populations at a national scale: example of Culicoides surveillance in France after bluetongue virus emergence. In Arthropods as vectors of emerging diseases. Edited by Mehlhorn H. Berlin: Springer; 2012:77-102. OpenURL

  25. Deblauwe I, de Witte JC, de Deken G, De Deken R, Madder M, Van Erk S, Hoza FA, Lathouwers D, Geysen D: A new tool for the molecular identification of Culicoides species of the Obsoletus group: the glass slide microarray approach.

    Med Vet Entomol 2012, 26:83-91. PubMed Abstract | Publisher Full Text OpenURL

  26. Kaufmann C, Ziegler D, Schaffner F, Carpenter S, Pfluger V, Mathis A: Evaluation of matrix-assisted laser desorption/ionization time of flight mass spectrometry for characterization of Culicoides nubeculosus biting midges.

    Med Vet Entomol 2011, 25:32-38. PubMed Abstract | Publisher Full Text OpenURL

  27. Kaufmann C, Schaffner F, Ziegler D, Pflüger V, Mathis A: Identification of field-caught Culicoides biting midges using matrix-assisted laser desorption/ionization time of flight mass spectrometry.

    Parasitology 2012, 139:248-258. PubMed Abstract | Publisher Full Text OpenURL

  28. Begert M, Seiz G, Foppa N, Schlegel T, Appenzeller C, Müller G: Die Überführung der klimatologischen Referenzstationen der Schweiz in das Swiss National Basic Climatological Network (Swiss NBCN). In Arbeitsberichte MeteoSchweiz. Zürich: MeteoSchweiz; 2007:1-43. OpenURL

  29. Venter GJ, Meiswinkel R: The virtual absence of Culicoides imicola (Diptera: Ceratopogonidae) in a light-trap survey of the colder, high-lying area of the eastern Orange Free State, South Africa, and implications for the transmission of arboviruses.

    Onderstepoort J Vet Res 1994, 61:327-340. PubMed Abstract OpenURL

  30. Schwenkenbecher JM, Mordue AJ, Piertney SB: Phylogenetic analysis indicates that Culicoides dewulfi should not be considered part of the Culicoides obsoletus complex.

    Bull Entomol Res 2009, 99:371-375. PubMed Abstract | Publisher Full Text OpenURL

  31. Van Ark H, Meiswinkel R: Subsampling of large light trap catches of Culicoides (Diptera: Ceratopogonidae).

    Onderstepoort J Vet Res 1992, 59:183-189. PubMed Abstract OpenURL

  32. Bland JM, Altmann DG: Multiple significance tests: the Bonferroni method.

    Br Med J 1973, 310:170. OpenURL

  33. Anonymous: Scientific opinion of the Scientific Panel on Animal Health and Welfare on the EFSA selfmandate on bluetongue origin and occurrence.

    EFSA J 2007, 480:1-20. OpenURL

  34. Torina A, Caracappa S, Mellor PS, Baylis M, Purse BV: Spatial distribution of bluetongue virus and its Culicoides vectors in Sicily.

    Med Vet Entomol 2004, 18:81-89. PubMed Abstract | Publisher Full Text OpenURL

  35. De Liberato C, Farina F, Magliano A, Rombola P, Scholl F, Spallucci V, Scaramozzino P: Biotic and abiotic factors influencing distribution and abundance of Culicoides obsoletus group (Diptera: Ceratopogonidae) in central Italy.

    J Med Entomol 2010, 47:313-318. PubMed Abstract | Publisher Full Text OpenURL

  36. Kremer M, Callot J: Sur quelques Culicoides (Diptera: Ceratopogonidae) du Haut-Valais.

    Acta Trop 1961, 18:254-256. PubMed Abstract OpenURL

  37. Kaufmann C, Schaffner F, Mathis A: Monitoring of biting midges (Culicoides spp.), the potential vectors of the bluetongue virus, in the 12 climatic regions of Switzerland.

    Schweiz Arch Tierh 2009, 151:205-213. PubMed Abstract | Publisher Full Text OpenURL

  38. Tschuor AC, Kaufmann C, Schaffner F, Mathis A: Occurrence of biting midges (Culicoides spp.) at three different altitudes in an alpine region of Switzerland.

    Schweiz Arch Tierh 2009, 151:215-221. PubMed Abstract | Publisher Full Text OpenURL

  39. Nielsen SA, Nielsen BO, Chirico J: Monitoring of biting midges (Diptera: Ceratopogonidae: Culicoides Latreille) on farms in Sweden during the emergence of the 2008 epidemic of bluetongue.

    Parasitol Res 2010, 106:1197-1203. PubMed Abstract | Publisher Full Text OpenURL

  40. Mehlhorn H, Walldorf V, Klimpel S, Schaub G, Kiel E, Focke R, Liebisch G, Liebisch A, Werner D, Bauer C, Clausen H, Bauer B, Geier M, Horbrand T, Batza HJ, Conraths FJ, Hoffmann B, Beer M: Bluetongue disease in Germany (2007–2008): monitoring of entomological aspects.

    Parasitol Res 2009, 105:313-319. PubMed Abstract | Publisher Full Text OpenURL

  41. Kiel E, Liebisch G, Focke R, Liebisch A, Werner D: Monitoring of Culicoides at 20 locations in northwest Germany.

    Parasitol Res 2009, 105:351-357. PubMed Abstract | Publisher Full Text OpenURL

  42. Sanders CJ, Selby R, Carpenter S, Reynolds DR: High-altitude flight of Culicoides biting midges.

    Vet Rec 2011, 169:208. PubMed Abstract | Publisher Full Text OpenURL

  43. Hörbrand T, Geier M: Monitoring of Culicoides at nine locations in Southern Germany (2007–2008).

    Parasitol Res 2009, 105:387-392. PubMed Abstract | Publisher Full Text OpenURL

  44. Takken W, Verhulst N, Scholte E-J, Jacobs F, Jongema Y, van Lammeren R: The phenology and population dynamics of Culicoides spp. in different ecosystems in The Netherlands.

    Prev Vet Med 2008, 87:41-54. PubMed Abstract | Publisher Full Text OpenURL

  45. Cagienard A, Griot C, Mellor PS, Denison E, Stark KDC: Bluetongue vector species of Culicoides in Switzerland.

    Med Vet Entomol 2006, 20:239-247. PubMed Abstract | Publisher Full Text OpenURL

  46. Acevedo P, Ruiz-Fons F, Estrada R, Marquez AL, Miranda MA, Gortazar C, Lucientes J: A broad assessment of factors determining Culicoides imicola abundance: modelling the present and forecasting its future in climate change scenarios.

    PLoS One 2010, 5:e14236. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  47. Conte A, Goffredo M, Ippoliti C, Meiswinkel R: Influence of biotic and abiotic factors on the distribution and abundance of Culicoides imicola and the Obsoletus complex in Italy.

    Vet Parasitol 2007, 150:333-344. PubMed Abstract | Publisher Full Text OpenURL

  48. Conte A, Ippoliti C, Savini G, Goffredo M, Meiswinkel R: Novel environmental factors influencing the distribution and abundance of Culicoides imicola and the Obsoletus complex in Italy.

    Vet Ital 2007, 43:571-580. PubMed Abstract | Publisher Full Text OpenURL

  49. Baldet T, Delécolle JC, Cêtre-Sossah C, Mathieu B, Meiswinkel R, Gerbier G: Indoor activity of Culicoides associated with livestock in the bluetongue virus (BTV) affected region of northern France during autumn 2006.

    Prev Vet Med 2008, 87:84-97. PubMed Abstract | Publisher Full Text OpenURL

  50. Baylis M, Parkin H, Kreppel K, Carpenter S, Mellor PS, McIntyre KM: Evaluation of housing as a means to protect cattle from Culicoides biting midges, the vectors of bluetongue virus.

    Med Vet Entomol 2010, 24:38-45. PubMed Abstract | Publisher Full Text OpenURL

  51. Meiswinkel R, Goffredo M, Dijkstra EGM, van der Ven IJK, Baldet T, Elbers A: Endophily in Culicoides associated with BTV-infected cattle in the province of Limburg, south-eastern Netherlands, 2006.

    Prev Vet Med 2008, 87:182-195. PubMed Abstract | Publisher Full Text OpenURL

  52. Clausen P-H, Stephan A, Bartsch S, Jandowsky A, Hoffmann-Kohler P, Schein E, Mehlitz D, Bauer B: Seasonal dynamics of biting midges (Diptera: Ceratopogonidae, Culicoides spp.) on dairy farms of Central Germany during the 2007/2008 epidemic of bluetongue.

    Parasitol Res 2009, 105:381-386. PubMed Abstract | Publisher Full Text OpenURL

  53. Croxatto A, Prod'hom G, Greub G: Applications of MALDI-TOF mass spectrometry in clinical diagnostic microbiology.

    FEMS Microbiol Rev 2012, 36:380-407. PubMed Abstract | Publisher Full Text OpenURL

  54. Merz B, Bächli G, Haenni J-P: Zweiter Nachtrag zur Checkliste der Diptera der Schweiz.

    Mitt Schweiz Entomol Gesell 2006, 56:135-165. OpenURL